Some documentation of my wiring to the MakerX VESC since I am about to connect a BRemote instead of the Maytech one.
| VESC | First cable | Second | Third | Fourth | Maytech Rx | BRemote Rx V1.3 |
|---|---|---|---|---|---|---|
| PPM | ||||||
| Sig | Yellow | Orange | Yellow | Orange | PWM | SRV |
| 5V | Red | NC | ||||
| GND | Black | NC | ||||
| COMM | ||||||
| AUX | Brown | NC | ||||
| MISO_ADC_EXT2 | Orange | NC | ||||
| TX_SDA_NSS | White | Purple | Pink | Purple | RXD | TX2 |
| RX_SCL_MOSI | Blue | Grey | Grey | Grey | TXD | RX2 |
| SCK_ADC_EXT1 | Green | NC | ||||
| GND | Black | Black | Blue | Black | GND | GND |
| 3.3V | Yellow | NC | ||||
| 5V | Red | Red | Red | Red | 5V | 5V |
| Other | ||||||
| Battery + | Green | Green | Brown | Grey | BAT | BMS+ |
| Motor phase | Blue | Blue | White | White | MOT |
